This video shows how to add LED lights to your portable ice fishing sled. I first go over materials and basic skills required, then explain exactly how I wired my personal set-up. The idea is that you will be able to take the knowledge to customize your own LED lighting set-up. You can power these lights with any 12V battery. The run time before the battery dies varies greatly depending on the number of lights you have running. The specific links to the lights and accessories I used are below:
LED Lights:
http://amzn.to/2kJZPYu
2.1mm x 5.5mm Extension Cable with On/Off Switch:
http://amzn.to/2khWEu5
Voltage Meter:
http://amzn.to/2ki0zan
Quick Disconnect Spade Terminals:
http://amzn.to/2kJW2Kv
Soldering Iron Kits:
http://amzn.to/2kIWtZU
2.1mm x 5.5mm splitters
The above Amazon links are affiliate links. That means I get a couple percent from the sale from Amazon if the products are bought after using those links. I make NO money from the manufacturers and aren’t involved with them in any way. It’s a simple way you can help support the channel. Thanks!